1000L LPE Extraction System​

  • Volume: 2x500L vessel holds up to 200-300 pound of dried and ground material
  • Pressure: Maximum system operating pressure 12 bar 
  • Power consumption [installed]: 150 kW
  • Temperature: max 85°C (185°F) 
  • Materials: 304 stainless steel 
  • Vessel: interior is polished to food grade level 
  • Closures: ASME flange, both ends 
  • Sealing: PTFE flat seals 
  • Temperature measurement: Pt100 sensors 
  • Water Jacket volume: 200 Liters (53 gallons) 
  • Safety: spring loaded safety relief valve
  • Raw material feeding: vacuum mode 
  • Residue removal: vacuum mode, quick closure 
  • Raw material agitation: low speed stirrer
  • Separator: Jacketed separator/collection vessel 
  • Volume: 1 pieces x 150 Liters 
  • Pressure: Maximum system operating pressure 12 bar
  • Temperature: max 85°C (185°F) 
  • Materials: 304 stainless steel
  • Cleaning: Manual by direct access
  • Safety: spring loaded safety relief valve
  • Flow path: from extractor to separator is continuous diameter with no constrictions
  • Construction: Plate type and shell & tube type
  • Materials: all 304 stainless steel
  • Cooling/Heating: R134a refrigerant
  • Refrigeration: heat pumping
  • Temperature range: 20°C to 45°C (68°F to 113°F)
  • Maximum refrigerant content: 1000 kg
  • Skids number: 1 piece 
  • Height: 3,00mm 
  • Length: 5,000mm 
  • Width: 5,000 mm 
  • Total weight: app. 12,000 kg  
  • Floor mounting area: min. 60 m²
  • Ceiling height: 5.5 m
  • Functions: Fully automatic programmable Logic Controller (PLC) touch screen interface with first level safety functionality and user programmable pressure, temperature, and time.
  • Safety: Pressure transducers monitor system pressure and shut down system to prevent accidental over-pressurization/safety valves.
Category:

Description

Introducing our flagship 1000L LPE Extraction System, the pinnacle of extraction technology for large-scale operations. With its two 500L vessels, this system empowers you to effortlessly process an impressive amount of dried and ground material. Crafted from durable 304/316 stainless steel, the Extraction Vessel ensures optimal conditions for extraction, operating at specific pressure and temperature ranges. Its polished interior guarantees a food-grade level, while ASME flange closures and PTFE flat seals ensure airtight performance, maintaining the integrity of the extraction process.

The Separator/Collection Vessel, boasting a volume of 150 liters, enables efficient separation and collection of the extracted materials. Its continuous diameter flow path, along with the jacketed construction, ensures smooth processing without any restrictions. The Heat Exchanger, incorporating plate and shell & tube types, provides precise temperature control using energy-efficient R134a refrigerant, optimizing the extraction conditions for superior results.

Controlled by a fully automatic programmable Logic Controller (PLC) touch screen interface, the 1000L LPE Extraction System offers advanced regulation of crucial parameters such as pressure, temperature, and time. This level of control allows you to customize and fine-tune the extraction process according to your specific requirements. With safety features like pressure transducers and safety valves, the system ensures a secure working environment, prioritizing the well-being of operators.

Experience unparalleled extraction capabilities with the 1000L LPE Extraction System, the cutting-edge solution that delivers exceptional productivity, efficiency, and control for large-scale extraction operations. Unlock the true potential of your botanical extracts with this advanced LPE extractor, designed to elevate your extraction endeavors to new heights.

Extraction

R134a aerosol equipment designed and manufactured by PURE5™ Extraction is one of the latest cutting edge techniques to enhance the speed, improve the efficacy and achieve best quality of the cannabis extracts. Using R134a aerosol gas is a cutting-edge process that offers a “solventless” approach to the extraction of the  desired active compounds from the cannabis plant material. This process is designed to directly replace the CO2 liquified gas process and falls into the same category of facility certification less the pressure vessel and toxic leakage monitoring. 

The small size, non polar and inert nature of the aerosol molecule helps to penetrate the plant tissue and extracts thoroughly the oil soluble fractions. We extraction is performed at room temperature conditions with no thermal degradation or loss of volatile compounds during isolation and the extraction process is seamless to the full spectrum resin delivered from the plant. Full terpene profile is collected without degradation of components and it is easily separated from solvent. 

The aerosol does not extract solids and chlorophylls and in many cases winterization may not be required. The extracts are PH neutral and suitable for many pharmaceutical applications that are pH sensitive. Low boiling point eliminates the need for complex and slow solvent recovery.

The extracted oil is a liquid mirror of the flower strain profile and bears the same experience when consumed, an experience that cannot be achieved with any other extract.

Infusion

Very often your flower may end up with potency that is below than the market accepted value. For example if your dispensary takes over 20% potent flower and your grow batch is tested at 15% do not worry, we have the solution for you. You just infuse your flower with the extra 5% you need in minutes utilizing the same equipment you used to extract it. The room temperature safe and gentle process using PURE5 Equipment allows multiple uses of the process. 

We have designed revolutionary technology because we are looking at the cannabis industry the same way as the gourmet industry. Give your clients an experience that they have never seen before. Just cook for them in the PURE5 machine, mix and extract flavors all together, infuse the flower with natural oils, and remediate components form the flower. All that is possible with minimum effort, speak with us for more details on how to achieve best performance. 

Since we have mentioned the gourmet experience, you can enhance your cannabis products with local flavors and sensations. Example recipes: Add 50g fresh ginger root in the extraction chamber with your cannabis flower to add the spicy ginger flavor to your vape juice. Add 100g mango fruit to add tropical flavor. Add 50g lavender flowers or lemon peels to boost the linalool and limonene terpene in your extract produced from your flower. 

Datasheet

Download the Datasheet

Demo

 

10L LPE Extraction System CBD oil output

 

Reviews

There are no reviews yet.

Be the first to review “1000L LPE Extraction System​”

Your email address will not be published. Required fields are marked *

You may also like…